First edition. International Standard ISO 10333-2 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 24 p. This part of ISO 10333 specifies requirements, test methods, instructions for use and maintenance, marking, labelling and packaging, as appropriate, for...
First edition. International Standard ISO 10333-3 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 25 p. This part of 10333 specifies requirements, test methods, instructions for use and maintenance, marking, labelling and packaging, as appropriate, for...
First edition. ISO 10333-4 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 38 p. This part of ISO 10333 specifies requirements, test methods, instructions for use and maintenance, marking, labelling and packaging, as appropriate, for vertical rails and...
First edition. International Standard ISO 10333-5 was prepared by Technical Committee ISO/TC 94, Personal safety— Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 18 p. This part of ISO 10333 specifies requirements, test methods, instructions for use and maintenance, marking, labelling and packaging, as appropriate, for...
First edition. ISO 10333-6 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 38 p. This part of ISO 10333 specifies tests and requirements for complete personal fall arrest systems (PFAS) made up from specific combinations of components and subsystems selected...
First edition. International Standard ISO 11393 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 22 p. This part of ISO 11393 defines the design and specifies the requirements and test methods for leg protectors which offer protection against cutting from a hand-held chain-saw,...
First edition. International Standard ISO 11393 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 14 p. This part of ISO 11393 specifies test methods to be used to assess the resistance of footwear to cutting by hand-held chain-saws. This part of ISO 11393 is applicable only to footwear...
First edition. ISO 11393-4 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 30 p. This part of ISO 11393 specifies the requirements and test methods for gloves that are intended to provide protection against cuts by a hand-held chain-saw, including requirements for identification,...
First edition. International Standard ISO 11393-5 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. It is based on EN 381-8:1997 and EN 381-9:1997. — 20 p. This part of ISO 11393 specifies requirements and the test methods to be used to assess the resistance of gaiters to cutting by...
First edition. ISO 11393-6 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 28 p. This part of ISO 11393 specifies requirements for the protection offered by upper body protectors against cutting by a hand-held chain-saw. It also specifies the procedures for sampling and pre-treatment...
First edition. ISO 11611 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on...
Second edition. ISO 11612 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 34 p. This International Standard specifies performance requirements for garments made from flexible materials, which are designed to protect the wearer’s body, except the hands, from heat and/or flame. For...
First edition. International Standard ISO 11613 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 44 p. This International Standard specifies test methods and minimum requirements for protective clothing to be worn during firefighting and associated activities where there is a risk of...
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 14, Fire-fighters’ personal equipment. — 14 p. This part of ISO 11999 specifies the minimum design and performance requirements for a fire hood as part of personal protective equipment (PPE) to be used by firefighters, primarily but not...
Second edition. ISO 12127-1 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, and by Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets in collaboration. — 16 p. This part of ISO 12127 specifies a test method for the determination of...
First edition. ISO 12127-2 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 16 p. This part of ISO 12127 specifies a test method designed to evaluate the heat transfer and the behaviour of materials used for protective clothing when such materials are struck by high temperature metal...
First edition (01.08.2013), correction (15.11.2013). The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 6, Eye and face protection. — 92 p. This International Standard specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all...
First edition. ISO 12312-1 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 6, Eye and face protection. — 28 p. This part of ISO 12312 is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation. Information on...
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 6, Eye and face protection. — 36 p. This part of ISO 12609 specifies performance and labelling of eye protectors used for ILS equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical...
First edition. The committee responsible for this document is ISO/TC 94, Personal safety – Protective clothing and equipment, Subcommittee SC 6, Eye and face protection. — 24 p. This International Standard gives guidance and information to users, manufacturers, suppliers, and safety advisors on the selection and use of eye protectors for intense light source (ILS) equipment...
Second edition. ISO 13287 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with ISO Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna...
First edition. ISO 13506 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 36 p. This International Standard provides the general principles of a test method for evaluating the performance of complete garments or protective clothing ensembles in a flash fire or other short duration...
Secon edition. ISO 13688 was prepared by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, Subcommittee SC 13, Protective clothing and by Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets in collaboration. This second edition cancels and replaces the first edition (ISO 13688:1998), which has...
First edition. ISO 13982-1 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on...
Amendment 1 (15.10.2010) for ISO 13982-1 (15.11.2004). Amendment 1 to ISO 13982-1:2004 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 6 p.
First edition. ISO 13982-2 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on...
Second edition. ISO 13994 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. This second edition cancels and replaces the first edition (ISO 13994:1998), which has been technically revised. — 24 p. This International Standard describes a laboratory test method that enables determination of...
Technical corrigendum 1 (15.10.2006) for ISO 13994:2005). Technical Corrigendum 1 to ISO 13994:2005 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 2 p.
First edition. International Standard ISO 13996 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 8 p. This International Standard specifies a test method for measuring the puncture resistance of protective clothing or materials used for these products.
First edition. International Standard ISO 13997 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 14 p. This International Standard specifies a cut test method, and related calculations, for use on materials and assemblies designed for protective clothing. The test determines resistance...
First edition. International Standard ISO 13999 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. It is based on EN 1082-1:1996. — 46 p. This part of ISO 13999 specifies requirements for the design, penetration resistance, ergonomic characteristics, straps, weight, material, marking and...
First edition. ISO 13999-2 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. It is based on European Standard EN 1082-2:2000. — 24 p. This part of ISO 13999 specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut-resistant...
First edition. ISO 13999-3 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. It is based on EN 1082-3:2000. — 22 p. This part of ISO 13999 specifies an impact cut test for use on fabric, leather and other materials used in protective clothing, gloves and arm guards. Annex A of this part...
First edition. ISO 14116 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on...
First edition. International Standard ISO 14567 was prepard by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 32 p. This International Standard specifies requirements, test methods, and marking, labelling and packaging, as appropriate, of both permanent and temporary...
First edition. ISO 14877 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). — 24 p. This European Standard specifies...
Second edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. This second edition cancels and replaces the first edition (ISO 15025:2000). — 28 p. This document specifies two procedures (surface ignition and bottom-edge ignition) for determining flame spread properties of...
First edition. ISO 15384 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 18 p. This International Standard specifies methods of test and minimum performance requirements for protective clothing to be worn in wildland firefighting and associated activities. This clothing is not...
First edition. International Standard ISO 15538 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 20 p. This International Standard specifies test methods and minimum performance requirements for protective clothing that relies upon the ability of the outer material to reflect intense...
First edition. ISO 16024 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 22 p. This International Standard specifies design and performance requirements, test methods, user instructions, marking and labelling as appropriate, of flexible horizontal lifeline...
First edition. ISO 16073 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 14, Fire-fighters' personal equipment. — 80 p. This International Standard specifies the minimum performance requirements and methods of test for personal protective equipment (PPE) covering the torso, neck, arms, hands, legs, feet, head,...
First edition. ISO 16602 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 48 p. This International Standard establishes minimum performance classification and labelling requirements for protective clothing designed to provide protection against chemicals. Protective clothing items...
First edition. ISO 16603 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. It is based on ASTM F1670-98. — 18 p. This International Standard describes a laboratory test method for measuring the penetration resistance of clothing materials to blood and body fluids. This test method uses a...
First edition. ISO 16604 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. It is based on ASTM F1671-97b. — 24 p. This International Standard describes a laboratory test method for measuring the resistance of materials used in protective clothing to penetration by blood-borne pathogens....
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 42 p. This part of ISO 16900 specifies the test methods for determining inward leakage of respiratory interfaces (RI) and total inward leakage of complete respiratory protective devices (RPD) using...
First edition. The committee responsible for this document is ISO/TC 94, Personal safety - Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 18 p. This part of ISO 16900 specifies the laboratory test method for determining the field of vision for a respiratory protective device (RPD).
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 22 p. This part of ISO 16900 specifies the test methods for determining the volume-averaged work of breathing and peak respiratory pressures imposed by the respiratory protective device (RPD) ....
First edition. ISO 16900-2 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 22 p. This part of ISO 16900 specifies the method(s) of test for breathing resistance for: ⎯ complete respiratory protective devices 1); ⎯ filters for respiratory protective devices; ⎯ respiratory...
First edition. ISO 16900-3 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 18 p. This part of ISO 16900 specifies the test methods for particle filter penetration of separate or integral filters for respiratory protective devices.
First edition. ISO 16900‑4 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 24 p. This part of ISO 16900 specifies the test method for determining the gas capacity of separate or integral gas filters and combined filters for respiratory protective devices. It includes the...
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 42 p. This part of ISO 16900 specifies the characteristics of breathing machines, metabolic simulators, RPD head forms/torso, RPD tools and RPD verification tools that are common to RPD test...
Firtst editon. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 20 p. This part of ISO 16900 specifies the methods for measuring air flow rates delivered to the wearer by an assisted filtering RPD.
First edition. ISO 16972 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 42 p. This International Standard is applicable to respiratory protective devices. It defines commonly used terms and specifies units of measurement to achieve a uniform interpretation and to prevent...
Second edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection. This second edition cancels and replaces the first edition (ISO 17249:2004) which has been technically revised. It also incorporates the Amendment ISO 17249:2004/Amd 1:2007. — 22 p. This International Standard...
First edition. ISO 17420-3 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 24 p. This part of ISO 17420 is applicable to an unassisted filtering device and specifies a standard thread connection between a filter and the respiratory interface as required in ISO 17420-2. This...
First edition. ISO 17491-1 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. This edition of ISO 17491-1, together with ISO 17491-2, ISO 17491-3, ISO 17491-4 and ISO 17491-5, cancels and replaces ISO 17491:2002 which has been technically revised. — 12 p. This part of ISO 17491 specifies a...
First edition. ISO 17491-3 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on...
First edition. ISO 17491-4 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on...
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. ISO 17491 (all parts) cancels and replaces ISO 17491:2002, which has been technically revised. — 14 p. This part of ISO 17491 specifies an alternative test method to the one described in ISO 17491-4. The method...
First edition. ISO 17492 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. It is based on Section 6-10 of NFPA 1971:2000. — 26 p. This International Standard specifies a test method for measuring the heat-transfer of horizontally mounted flame-resistant textile materials when exposed to a...
Technical corrigendum 1 (01.04.2004) for ISO 17492:2003. Technical Corrigendum 1 to ISO 17492:2003 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 1 p.
Second edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. This second edition cancels and replaces the first edition (ISO 17493:2000) , which has been technically revised. — 18 p. This document describes a test method for evaluating the heat resistance of protective...
Published 2001-12-15. Technical Corrigendum 1 to International Standard ISO 2023:1994 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment. — 1 p.
Second edition. ISO 20344 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with ISO Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna...
Second edition. ISO 20345 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna...
Second edition. ISO 20346 was prepared by the European Committee for Standardization (CEN) Technical Commitee CEN/TC 161, Foot and leg protectors, in collaboration with ISO Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna...
Second edition. CEN/TC 161, Foot and leg protectors, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This second edition cancels and replaces the first edition (ISO 20347:2004), which has...
First edition. ISO 20349 was prepared by the European Committee for Standardization (CEN) Technical Committee ISO/TC 161, Foot and leg protectors in equipment, in collaboration with ISO Technical Committee ISO/TC 94 Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the Agreement on technical cooperation between ISO and...
Amendment 1 (15.10.2016) for ISO 20471 (15.03.2013). Amendment 1 to ISO 20471:2013 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 6 p.
First edition. ISO 22159 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 58 p. This International Standard specifies requirements, test methods, marking and information to be supplied by the manufacturer for descending devices. It also specifies some basic...
First edition. ISO 22608 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 18 p. This International Standard specifies a test method to measure repellency, retention and penetration of a known volume of liquid pesticide when applied to protective clothing material. No external...
First edition. ISO 22609 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. It is based on ASTM F1862-00a. — 24 p. This International Standard describes a laboratory test method for measuring the resistance of medical face masks to penetration by a splash of synthetic blood. This...
First edition. ISO 22610 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 205, Non-active medical devices, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN...
First edition. ISO 22612 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). — 16 p. This test method provides a means for...
First edition. ISO 22846-1 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 10 p. This part of ISO 22846 gives the fundamental principles for the use of rope-access methods for work at height. It is intended for use by employers, employees and self-employed...
First edition. ISO 22846‑2 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls. — 52 p. This part of ISO 22846 provides recommendations and guidance on the use of rope access methods for work at height and expands on the fundamental principles given in ISO 22846-1,...
First edition. International Standard IS0 3873 was drawn up by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, and was circulated to the member bodies in August 1975. — 10 p. This International Standard specifies physical and performance requirements, methods of test and marking requirements for industrial safety helmets.
First edition. International Standard ISO 4849 was developed by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, and was circulated to the member bodies in July 1978. — 12 p. This International Standard specifies functional requirements for the various types of personal eye-protectors used mainly in industry.
First edition. International Standard ISO 4850 was developed by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, and was circulated to the member bodies in May 1977. — 7 p. This International Standard specifies the numbering of, and transmittace requirements for filters intended to protect operative performing manual work involving welding,...
First edition. International Standard ISO 4851 was developed by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, and was circulated to the member bodies in April 1977. — 4 p. This International Standard specifies the numbering of, and transmittance requirements for filters for protection against ultra-violet radiation. It also gives guidance...
First edition. International Standard ISO 4852 was developed by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, and was circulated to the member bodies in April 1977. — 6 p. This International Standard specifies the numbering of, and the transmittance requirements for, filters for protection against infra-red rediation. It also gives guidance...
First edition. International Standard ISO 4854 was developed by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, and was circulated to the member bodies in July 1978. — 20 p. This International Standard specifies the optical test methods for eye-protectors the requirements for which are given in ISO 4849 to ISO 4853. The test methods other...
First edition. International Standard ISO 4855 was developed by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, and was circulated to the member bodies in July 1978. — 12 p. This International Standard specifies the non-optical test methods for eye-protectors the requirements for which are given in ISO 4849 to 4853. The optical test methods...
First edition. International Standard ISO 4856 was developed by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, and was circulated to the member bodies in September 1981. — 6 p. This International Standard provides a survey of the requirements which have to be met by the various types of oculars and eye-protectors as well as by the...
First edition. International Standard ISO 6161 was developed by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment, and was circulated to the member bodies in July 1978. — 6 p. This International Standard specifies requirements for spectacle filters and eye-protectors against laser radiation within the spectral region 0,2 to 1000 µm.
Third edition. ISO 6529 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. This third edition cancels and replaces the second edition (ISO 6529:2001), which has been technically and editorially revised. — 52 p. This International Standard describes laboratory test methods to determine the...
Third edition. ISO 6530 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on...
Third edition. ISO 6942 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This third edition cancels and replaces the...
First edition. International Standard ISO 9150 was prepared by Technical Committee ISO/TC 94, Personal safety - Protective clothing and equipment. — 11 p. This International Standard specifies a test method desighed to evaluate the behaviour of materials used ro protective clothing when such materials are struck by small liquid metal splashes, especially when molten steel...
Second edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing and by Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets in collaboration. This second edition cancels and replaces the first edition (ISO 9151:1995). — 24 p....
Second edition. ISO 9185 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on...
First edition. ISO/TR 11610 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). — 104 p. This document contains a list of...
Second edition. ISO/TR 18690 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with ISO Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the agreement on technical cooperation between ISO and CEN...
First edition. ISO/TR 21808 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 14, Fire-fighters' personal equipment. — 22 p. This Technical Report sets out guidance for the selection, use, care and maintenance of PPE designed to provide protection for firefighters while carrying out their duties. The PPE covered...
First edition. ISO/TR 2801 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. ISO/TR 2801 cancels and replaces ISO 2801:1998, which has been technically revised. ISO/TR 2801 is based on CEN/TR 14560:2003. — 28 p. This Technical Report sets out guidance for the selection, use, care and...
First edition. ISO/TS 16973 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 38 p. This Technical Specification specifies the classification of Respiratory Protective Devices based on their performance. The performance requirements are given in the relevant performance...
First edition. ISO/TS 16974 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 16 p. This Technical Specification gives guidance on the marking to be used on respiratory protective devices (RPD) and the information to be supplied by the manufacturer/supplier.
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 82 p. This part of ISO 16975 specifies detailed information to assist persons responsible for establishing and implementing a programme for respiratory protective devices (RPD) that meet the...
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 22 p. This Technical Specification provides brief guidance to assist persons responsible for establishing and implementing a programme for respiratory protective devices (RPD) that meet the...
First edition. ISO/TS 16976-1 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 24 p. This Technical Specification is part of a series that provides information on factors related to humananthropometry, physiology, ergonomics and performance, for the preparation of standards...
First edition. ISO/TS 16976-2 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 32 p. This part of ISO/TS 16976 is one part of a series of technical specifications that provide information on factors related to human anthropometry, physiology, ergonomics and performance for...
First edition. ISO/TS 16976-3 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 30 p. This Technical Specification gives: - a description of the composition of the Earth's atmosphere; - a description of the physiology of human respiration; - a survey of the current biomedical...
First edition. ISO/TS 16976-4 was prepared by Technical Committee ISO/TC 94, Personal Safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 24 p. This Technical Specification describes how to calculate the work performed by a person’s respiratory muscles with and without the external respiratory impediments that are imposed by RPD of...
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 22 p. This part of ISO/TS 16976 provides information on the psycho-physiological effects related to the wearing of respiratory protective devices (RPD) and it is intended for the preparation of...
First edition. The committee responsible for this document is ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 15, Respiratory protective devices. — 20 p. This part of ISO/TS 16976 contains information related to the interaction between respiratory protective devices and the human body functions of hearing and speech.
Комментарии