National Association of Corrosion Engineers (NACE) International, Houston, TX. 2011. 23p. ISBN: 1-57590-163-3 Provides a standard set of test conditions for consistent evaluation of pipeline and pressure vessel steels and compares test results from different laboratories pertaining to the results of the absorption of hydrogen generated by corrosion of steel in wet H2S....
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2000. 35p.
Analyzes available and emerging technologies in the field of in-line pipeline inspection tools and reviews their status with respect to characteristics, performance, range of application, and limitations. It is intended as a practical reference for both new and...
Данный документ является переводом NACE 35100-2000 In-Line Inspection of Pipelines на русский язык. 39 с. Внутритрубная дефектоскопия (ВТД) имеет большое значение для обследования состояния трубопровода. Она является важной составляющей работ по обеспечению целостности трубопровода; на основе анализа данных разрабатывается программа качества данных работ для поддержания...
An American National Standard. National Association of Corrosion Engineers (NACE) International. — Houston, TХ. 2012. — 42 p. Analyzes available and emerging technologies in the field of in-line pipeline inspection tools and reviews their status with respect to characteristics, performance, range of application, and limitations. It is intended as a practical reference for both new...
The objective of this technical committee report is to provide a state-of-the-art overview of the materials selection, fabrication, postweld heat treatment (PWHT), inspection, and testing practices that have recently been applied to new pressure vessels (referred to in this report as equipment) destined for use in wet hydrogen sulfide (H2S) refinery service.
NACE International. 1440 South Creek Dr. Хьюстон, TX 77084-4906. Тел. +1 281-228-6200. Факс +1 281-228-6300. E-mail msd@mail.nace.org. Web www.nace.org. Напечатано в США NACE. Первое издание 2003-12-15. Данная часть 3 Стандарта ISO15156 устанавливает требования и дает рекомендации по выбору и пригодности трещиностойких коррозионностойких и других марок сплавов для оборудования,...
Hans van Wortel De Rondom 1, 5600 HE, Eindhoven, the Netherlands, 2007 Abstract Identificatin of relaxation failures Limiting conditions Extent of the jip programme Overwiev results Discussions Conclutions
S.J. Mishael,ChevronTexaco Dr. F.W.H. Dean, Ion Science Dr. C. Fowler,Bodycote Laboratories, 2004 Abstract Introdution Hydrogen blistering case history Predicting permeation Fracture toughness testing steel exposed to sour solutions Hydrogen activity
Ханс ван ВОРТЕЛЬ, 2007
Де Rondom 1, 5600 HE, Эйндховен, Нидерланды
Краткое описание
Введение
Определение повреждений,связанных с релаксационным растрескиванием
Предельные условия
Объем программы JIP
Результаты исследования
Выводы
Deli Duan,Yoon-Seok Choi, Shengli Jiang,Srdjan Nešić Institute for Corrosion and Multiphase Technology, Department of Chemical and Biomolecular Engineering, Ohio University 342 West State Street Athens, OH, 45701 USA, 2013 Abstract Introdution Experimental procedure Results Conclusions Acknowledgements
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2002. — 40 p. Стандарт ассоциации NACE International составлен на основе согласованного мнения специалистов – членов ассоциации, изучивших данный документ, сферу его применения и оснащение. Принятие стандарта не запрещает производство, сбыт, покупку или использование не...
NACE SP0572-2007 Standard Recommended Practice - Design, Installation, Operation, and Maintenance of Impressed Current Deep Anode Beds standard by National Association of Corrosion Engineers 07/01/2007, 18 pages, languages- English
This standard establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking,...
National Association of Corrosion Engineers (NACE) International. Houston, Texas. ISBN: 1-57590-168-4. 2000. 24p. This standard defines material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (water) phase with or without the presence of hydrocarbon. This standard does...
Standard Material Requirements. Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments. Этот стандарт определяет требования к материалоустойчивости в кислых и связанных с переработкой нефти сред, содержащих либо сероводород в виде газа или растворенные в воде смеси без наличия углеводородов. ISBN: 1-57590-168-4, 2005, NACE International, 23...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. ISBN 1-57590-120-1. 2002. 6p. This standard defines requirements for inhibited lubricants and recommends types of tests that may be used to select such materials.
Editorial Revision. — National Association of Corrosion Engineers, 1984. — 27 p. This Standard covers metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flow llne equipment, and field processing facllltles to be used In H2S bearing hydrocarbon service. This Standard applies to the materials used for...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. International Organization for Standardization (ISO). 149p. Contents: - NACE MR0175/ISO 15156-1-2001 Part 1: General principles for selection of cracking-resistant materials; - NACE MR0175/ISO 15156-2-2003 Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons; - NACE...
An American National Standard. Approved December 2, 2010. The International Organization for Standardization (ISO). Second edition, 2009-10-15 This second edition cancels and replaces the first edition (ANSI/NACE/ISO 15156-1:2001), of which it constitutes a minor revision. 16р. This part of ANSI/NACE MR0175/ISO 15156 describes general principles and gives requirements and...
An American National Standard. Approved December 2, 2010. The International Organization for Standardization (ISO). Second edition, 2009-10-15 This second edition cancels and replaces the first edition (ANSI/NACE/ISO 15156-2:2003), of which it constitutes a minor revision. 50р. This part of ANSI/NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and...
An American National Standard. Approved December 2, 2010. The International Organization for Standardization (ISO). Second edition, 2009-10- 15. This second edition cancels and replaces the first edition (ANSI/NACE/ISO 15156-3:2003), of which it constitutes a minor revision. 79р. This part of ANSI/NACE MR0175/ISO 15156 gives requirements and recommendations for the selection...
National Association of Corrosion Engineers (NACE) International. Houston, Texas. ISBN: 1-57590-021-1. 2003. 44 p. This standard presents metallic material requirements to provide resistance to sulfide stress cracking (SSC) and/or stress corrosion cracking (SCC) for petroleum production, drilling, gathering and flow line equipment, and field processing facilities to be used in...
National Association of Corrosion Engineers, 1992. — 30 p. This standard presents metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipmen, and field processing facilities to be used in H 2 S- bearing hydrocarbon service.
National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2002. 28p. ISBN 1-57590-142-
0. This standard is applicable to carbon steel pipeline systems used to transport natural gas, hazardous liquids including anhydrous ammonia, carbon dioxide, water including brine, liquefied petroleum gases (LPGs), and other services that are not detrimental to the function...
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2000. — 28 p. This NACE International standard represents a consensus of those individual members who have reviewed this document, its scope, and provisions. Its acceptance does not in any respect preclude anyone, whether he has adopted the standard or not, from...
National Association of Corrosion Engineers (NACE) International. Houston, Texas. ISBN 1-57590-035-1. 2002. 33p. This standard presents acknowledged practices for the control of external corrosion on buried or submerged steel, cast iron, ductile iron, copper, and aluminum piping systems.
This standard is intended to serve as a guide for establishing minimum requirements for...
National Association of Corrosion Engineers (NACE) International. Houston, Texas. ISBN: 1-57590-039-4. 1997. 7p. If sulfide corrosion products are present on the surfaces of austenitic stainless steel and other austenitic alloy process equipment, there is a definite risk of polythionic acid stress corrosion cracking (SCC) when oxygen (air) and water are admitted during an...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. ISBN 1-57590-170-6. 2003. 44p. This standard provides guidelines for establishing minimum requirements for the control of corrosion on steel fixed offshore structures associated with petroleum production, and on the external portions of associated oil and gas handling equipment. Fixed structures include...
National Association of Corrosion Engineers, 1978. — 8 p. This Recommended Practice provides guidelines for the design, fabrication, and surface finish of tanks that are to be lined for corrosion resistance or to prevent product contamination in chemical immersion service. Suggestions are given in Appendix B for the responsibilities of the purchaser (user), fabricator, and...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. 1999. 8p. ISBN: 1-57590-074- 2. This standard provides procedures for low-voltage wet sponge testing and high-voltage spark testing of new coatings on conductive substrates. Electrical testing to determine the presence and number of discontinuities in a coating film is performed on a nonconductive...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. ISBN: 1-57590-014-9. 2001. 23p. This standard presents guidelines for the design, installation, and maintenance of cathodic protection for the exterior bottoms of on-grade carbon steel storage tanks. Cathodic protection can be installed to protect new or existing tanks, but cannot protect carbon...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. ISBN: 1-57590-189-7. 2004. 12p. This standard presents recommended procedures for using galvanic anodes to apply CP to the internal submerged surfaces of steel tanks used for the storage of potable and nonpotable fresh waters.
National Association of Corrosion Engineers (NACE) International. Houston, Texas. ISBN: 1-57590-143-9. 2002. 18p. This standard is intended to serve as a guide for establishing minimum requirements for the control of external corrosion on UST systems that are buried, partially buried, or in contact with the soil.
National Association of Corrosion Engineers, 1972. — 7 p. This Recommended Practice Standard presents a method for applying catalyzed coal tar epoxy coating to the interior of lease production tanks used primarily for the storage of corrosive fluids produced in the petroleum production industry. All phases of the lining process are presented, including material properties,...
National Association of Corrosion Engineers (NACE) International. Houston, Texas. ISBN: 1-57590-059-0. 2006. 10p. This standard covers hot- and cold-applied wax and component wrappers and wax-tape coating systems for the protection of underground metallic pipe, fittings, and valves. It outlines material requirements for hot-applied waxes, cold-applied waxes, component wrappers,...
17 стр.
NACE International
This standard establishes guidelines to prevent most forms of environmental cracking of weldments in carbon steel refinery equipment and piping. Weldments are defined to include the weld deposit, base metal HAZs, and adjacent base metal zones subject to residual stresses from welding.
This standard covers only carbon steels classified as P-No. 1,...
National Association of Corrosion Engineers (NACE) International, Houston, TX. 2000. 12p. ISBN: 1-57590-17097- 1. This standard provides recommended selection factors, surface preparation requirements, and references to applicable standard evaluation and quality control tests for interim coatings (rust preventives and vapor phase corrosion inhibitors) that provide temporary...
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2002. 57p. ISBN 1-57590-156-
0. This standard covers the NACE external corrosion direct assessment (ECDA) process for buried onshore ferrous piping systems. This standard is intended to serve as a guide for applying the NACE ECDA process on typical pipeline systems.
57 стр.
NACE International
This standard covers the NACE external corrosion direct assessment (ECDA) process for buried onshore ferrous piping systems. This standard is intended to serve as a guide for applying the NACE ECDA process on typical pipeline systems.
This standard was written to provide flexibility for an operator to tailor the process to specific pipeline...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. ISBN 1-57590-086-6. 2005. 19p. This standard is presented for the use of corrosion coupons in oilfield drilling, production, and transportation operations. Oilfield operations include oil-, water-, and gashandling systems, and drilling fluids. Corrosion coupon testing consists of the exposure of a small...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. 2006. 17p. ISBN 1-57590-208-
7. This standard presents recommended practices for the control of internal corrosion in steel pipelines and piping systems used to gather, transport, or distribute crude oil, petroleum products, or gas.
National Association of Corrosion Engineers (NACE) International. Houston, TХ. Reaffirmed 2007-03-15. 36 p. ISBN: 1-57590-035- 1. This standard presents acknowledged practices for the control of external corrosion on buried or submerged steel, cast iron, ductile iron, copper, and aluminum piping systems
National Association of Corrosion Engineers (NACE) International, Houston, TX. 2003. 33p. ISBN: 1-57590-170- 6. This standard provides guidelines for establishing minimum requirements for the control of corrosion on steel fixed offshore structures associated with petroleum production, and on the external portions of associated oil and gas handling equipment.
National Association of Corrosion Engineers (NACE) International, Houston, TX. 2007. 25p. ISBN: 1-57590-116- 1. This standard presents acknowledged practices for the mitigation of AC and lightning effects on metallic structures and corrosion control systems. This standard covers some of the basic procedures for determining the level of AC influence and lightning effects to...
National Association of Corrosion Engineers (NACE) International. Houston, Texas. ISBN: 1-57590-167-6. 2007. 19p. This standard presents standard practices for the design, fabrication, and surface finish of tanks and vessels to be lined for immersion service. Tanks and vessels may be lined for corrosion control or to prevent product contamination.
National Association of Corrosion Engineers (NACE) International. Houston, Texas. ISBN: 1-57590-081-5. 2006. 9p. This standard defines minimum physical quality and inspection standards for cast galvanic anodes for offshore applications. This standard is applicable to typical offshore platform anode configurations, and although some aspects of the standard may be relevant to all...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. Approved December 11, 2008. 60p. ISBN: 1-57590-156- 1. This standard covers the NACE external corrosion direct assessment (ECDA) process for buried onshore ferrous piping systems. This standard is intended to serve as a guide for applying the NACE ECDA process on typical pipeline systems. This...
Настоящий стандарт посвящен испытанию металлов на сопротивление разрушению от растрескивания под действием механического напряжения и коррозии в водных средах, содержащих сероводород. 2005 год. 50 стр. на русском языке.
An American National Standard. National Association of Corrosion Engineers (NACE) International. Houston, TХ. 1996. 35p. ISBN 1-57590-036-0
This standard covers the testing of metals subjected to tensile stresses for resistance to cracking failure in lowpH aqueous environments containing H 2 S. Carbon and low-alloy steels are commonly tested for EC resistance at room temperature...
National Association of Corrosion Engineers (NACE) International. Houston, Texas. ISBN: 1-57590-060-2. 2006. 12p. This standard test method describes a laboratory procedure for determining the potential and current capacity characteristics of aluminum alloy anodes used for CP. It provides a means for screening various heats or lots of anodes to determine performance consistency...
National Association of Corrosion Engineers (NACE) International. Houston, TХ. ISBN: 1-57590-216-8. 2008. 21p. This standard describes a test method for evaluating the VIA of various forms of VCI materials to reduce corrosion on the surface of ferrous metals. This standard is applicable to VCI materials in the form of thin flexible, rigid, or laminate materials. Examples of...
National Association of Corrosion Engineers (NACE) International, Houston, TX. 2003. 15p. ISBN: 1-57590-163- 3. This standard establishes a test method for evaluating the resistance of pipeline and pressure vessel plate steels to HIC caused by hydrogen absorption from aqueous sulfide corrosion
National Association of Corrosion Engineers (NACE) International. Houston, TХ. ISBN 1-57590-047-5. 2002. 31p. This standard provides testing procedures to comply with the requirements of a criterion at a test site on a buried or submerged steel, cast iron, copper, or aluminum pipeline.
SSPC-PA 1April 1, 2000 Editorial Revisions November 1, 2004 SSPC: The Society for Protective Coatings PAINT APPLICATION SPECIFICATION NO. 1, 14 стр. This specification covers procedures for the painting of steel surfaces. The scope of this specification is rather broad, covering both specific as well as general requirements for the application of paint. This specification does...
SSPC-PA 2,May 1, 2004, 11 стр.
This standard describes the procedures to measure the thickness of a dry fi lm of a nonmagnetic coating applied on a magnetic substrate using commercially available magnetic gages. These procedures are intended to supplement manufacturers’ operating instructions for the manual operation of the gages and are not intended to replace them.
The Society for Protective Coatings (SSPC) and National Association of Corrosion Engineers (NACE) International. Approved February 2002. 13 p. ISBN: 1-57590-129- 3. This standard recommended practice specifies the procedures to design, apply, and inspect fiberglass-reinforced plastic (FRP) linings that are applied internally to the bottom of carbon steel aboveground storage...
The Society for Protective Coatings (SSPC) and National Association of Corrosion Engineers (NACE) International. Approved September 1, 2000. 5 р. This joint standard covers the requirements for near-white blast cleaning of unpainted or painted steel surfaces by the use of abrasives. These requirements include the end condition of the surface and materials and procedures necessary...
The Society for Protective Coatings (SSPC) and National Association of Corrosion Engineers (NACE) International. Approved July, 2002. 12 р. This standard describes the use of waterjetting to achieve a defined degree of cleaning of surfaces prior to the application of a protective coating or lining system. These requirements include the end condition of the surface plus materials...
The Society for Protective Coatings (SSPC) and National Association of Corrosion Engineers (NACE) International. Approved March 17, 2003 . 18 р. This standard gives requirements for surface preparation of concrete by mechanical, chemical, or thermal methods prior to the application of bonded protective coating or lining systems. The requirements of this standard are applicable...
The Society for Protective Coatings (SSPC) and National Association of Corrosion Engineers (NACE) International. Approved 1998-10-26. 9 р. ISBN: 1-57590-077- 7. This joint standard covers the use of blast cleaning abrasives to achieve a defined degree of cleaning of steel surfaces prior to the application of a protective coating or lining system. This standard is intended for...
The Society for Protective Coatings (SSPC) and National Association of Corrosion Engineers (NACE) International. Approved January 1, 2007. 5 р. This joint standard covers the use of blast cleaning abrasives to achieve a defined degree of cleaning of steel surfaces prior to the application of a protective coating or lining system. This standard is intended for use by coating or...
The Society for Protective Coatings (SSPC) and National Association of Corrosion Engineers (NACE) International. Approved January 1, 2007. 6 р. This joint standard covers the requirements for commercial blast cleaning of uncoated or coated steel surfaces by the use of abrasives. These requirements include the end condition of the surface and materials and procedures necessary to...
The Society for Protective Coatings (SSPC) and National Association of Corrosion Engineers (NACE) International. Approved January 1, 2007. 5 р. This joint standard covers the requirements for brush-off blast cleaning of uncoated or coated steel surfaces by the use of abrasives. These requirements include the end condition of the surface and materials and procedures necessary to...
Комментарии