Elseiver. Nuclear Instruments and Methods in Physics Research B 240 (2005) 224–228 The results of the investigation of the phase composition, microstructure and dopant depth distribution in silicon layers implanted with iron ions and annealed with pulsed ion and laser beams are given. X-ray diffraction data indicate the phase transition FeSi→β -FeSi2 with increasing of the pulse...
Литературный перевод. Iron distribution in the implanted silicon under the action of high-power pulsed ion and laser beams. Elseiver. Nuclear Instruments and Methods in Physics Research B 240 (2005) 224–228 В данной статье представлены результаты по исследованию фазового состава, микроструктуры и распределения легирующего элемента по глубине в кремнии легированном ионами железа и...
Elseiver. Theoretical and Applied Fracture Mechanics 32 (1999) 47-53 This paper presents experimental results on the application of Microsecond Plasma Opening Switch (MPOS) technology to Al alloy surface modification. The main objective of the experiments presented here was to study the change in the tensile and fatigue properties of the MPOS-treated Al2024, Al7075 alloy samples....
Литературный перевод. Fatigue properties of 2024-T3, 7075-T6 aluminum alloys modified using plasma-enhanced ion beams. Elseiver. Theoretical and Applied Fracture Mechanics 32 (1999) 47-53 В настоящей статье представлены результаты экспериментов по применению технологии Микросекундного Плазменного Выключателя (МПВ) для поверхностной модификации алюминиевых сплавов. Основным...
Elseiver. Nuclear Instruments and Methods in Physics Research B 149 (1999) 61-66 This paper describes the MPOS application as on jon beam source for Ti film/Al substrate mixing. Single layer 500 nm films of titanium were deposited on aluminum 6061-T6 samples and thn irradiated by an ion beam. The ion beam energy was between 200 and 250 keV, the pulse length was 100 ns and the ion...
Литературный перевод. The high power pulsed ion beam mixing of a titanium layer with an aluminum substrate. Elseiver. Nuclear Instruments and Methods in Physics Research B 149 (1999) 61-66 В настоящей статье описано применение МДП, такого как ионный пучок, для перемешивания Ti пленки/Al подложки. Один слой титана, толщиной 500нм, осаждался на образцы из алюминия 6061-T6 и затем...
Noyes Publications, Westwood, New Jersey, USA, 1989. – 457 p. – ISBN: 0-8155-1199-X The work presented in this book deals with ion beam processing: for basic sputter etching of samples, for sputter deposition of thin films, for the synthesis of material in thin film form, and for the modification of the properties of thin filnls. The ion energy range we are concerned with is...
Elseiver. Surface & Coatings Technology 128-129 (2000) 387-393 Intense pulsed ion beam (IPIB) treatment is a new technology of surface modification. Compared to traditional ion implantation, the intense pulsed energy effect takes the main role in the IPIB modification processes. Therefore, the phase and microstructure changes induced by IPIB irradiation is much stronger than...
Литературный перевод. The phase and microstructure changes in 45 steel irradiated by intense pulsed ion beams. Elseiver. Surface & Coatings Technology 128-129 (2000) 387-393 Обработка мощным ионным пучком (МИП) является новой технологией для поверхностной модификации. В сравнении с традиционной ионной имплантацией, модификационном процессе МИП основную роль играет...
Elseiver. Applied Surface Science 253 (2007) 5425–5430 The microstructure and morphology of graphite irradiated by high-intensity pulsed ion beams (HIPIB) has been studied by varying the ion current density as 200, 350 and 1500 A/cm2 with one to five shots. Phase transformation from graphite to diamond-like carbon (DLC) on the HIPIB-irradiated graphite was confirmed by Raman...
Литературный перевод. Phase transformation of graphite irradiated by high-intensity pulsed ion beams. Elseiver. Applied Surface Science 253 (2007) 5425–5430 Изучалась микроструктура и морфология графита облученного мощным ионным пучком (МИП) с различной плотностью тока 200, 350 и 1500 после одного и пяти импульсов. Преобразование графита в алмазоподобную структуру (АПС) при...
Elseiver. Surface & Coatings Technology xxx (2011) xxx–xxx Microarc oxidation (MAO) films on AZ31 magnesium alloy were treated by high-intensity pulsed ion beam (HIPIB) irradiation with ion energy of 300 keV at ion current density of 200 A/cm 2. A remelted layer of a few micrometers was produced on irradiated MAO films. The corrosion resistance of MAO films was characterized by...
Elseiver. Surface and Coatings Technology 201 (2007) 8588–8595 Intense pulsed beam (IPB) techniques, including intense pulsed ion beams (IPIB) and intense pulsed electron beams (IPEB), are receiving more and more attention in the study of material modification. Being different from conventional ion implantation and electron beam radiation, IPB scan deliver much high-intensity...
Литературный перевод. Fundamentals and applications of material modification by intense pulsed beams. Elseiver. Surface and Coatings Technology 201 (2007) 8588–8595 Методы Мощного ионного пучка (МИП), включающие в себя мощные импульсные ионные пучки (МИИП) и мощные импульсные электронные пучки (МИЭП), получают все больше внимание при изучении модификации материалов. Основные...
Elseiver. Surface and Coatings Technology 185 (2004) 38–49 Optical metallography, transmission electron microscopy, and phase analysis were used to study the mechanisms of structural transformations in the surface layer of thickness Δh≈200 nm for single crystals and polycrystals of metals and alloys irradiated with high-power ion beams (HPIB’s). Characteristic features of the...
Литературный перевод. Features of the morphology, defect substructure, and phase composition of metal and alloy surfaces upon high-power ion beam irradiation. Elseiver. Surface and Coatings Technology 185 (2004) 38–49 Оптическая металлография, просвечивающая электронная микроскопия и фазовый анализ использовались для изучения механизмов структурных преобразований приповерхностных...
Journal of the Korean Vacuum Science & Technology; JKVST Vol.0, No.0, 2003, pp.00~00 In this paper, we studied, by numerical calculation, a system, which was composed of metal-film and metal-substrate being irradiated by IPIB with beam ion energy 250keV, current density 10 to 250 A/cm2 . While the IPIB irradiation was going on, an induced effect named mixing occurred. In this...
Литературный перевод. A calculation on the Metal-Film Mixing by Intense Pulse Ion Beam (IPIB) Journal of the Korean Vacuum Science & Technology; JKVST Vol.0, No.0, 2003, pp.00~00 В данной статье проводится математическое моделирование систем металлическая пленка – металлическая подложка при облучении их МИП с энергией ионов 250 кэВ, плотностью тока 10-250 А/см2 . При облучении...
Elseiver. Surface and Coatings Technology 201 (2007) 4961–4964 We have succeeded in preparing polycrystalline silicon thin films by the intense pulsed ion-beam evaporation method without impurities on substrates of silicon and quartz. Good crystallinity and high deposition rate were achieved without thermal processing such as heating the substrates. The crystallinity of poly-Si...
Литературный перевод. Preparation of silicon thin films by intense pulsed ion-beam evaporation method with low temperature process. Elseiver. Surface and Coatings Technology 201 (2007) 4961–4964 Мы получили тонкие поликристаллические пленки кремния без примесей на кремниевых и кварцевых подложках путем испарения мощным ионным пучком. Мы достигли хорошей кристаллизации при высоких...
Elseiver. Applied Surface Science 257 (2010) 72–81 The dry sliding tribological behavior of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam (HIPIB) at energy density of 3.4 J/cm2 with 10 shots is investigated by dry sliding wear tests in order to explore the effect of HIPIB irradiation on tribological property of magnesium alloy. Surface morphologies, composition...
Elseiver. Materials characterization 62 (2011) 599-605 High-intensity pulsed ion beam (HIPIB) irradiation of AZ31 magnesium alloy is performed and electrochemical corrosion experiment of irradiated samples is carried out by using potentiodynamic polarization technology in order to explore the effect of HIPIB irradiation on corrosion resistance of magnesium alloy. The surface...
Литературный перевод. Dry sliding tribological behavior of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam. Elseiver. Applied Surface Science 257 (2010) 72–81 Исследовалось поведение магниевого сплава AZ31, облученного десятью импульсами мощного ионного пучка с плотностью энергии 3,4 Дж/см2 , в условиях сухого трения, для изучения трибологических свойств...
Elseiver. Surface and Coatings Technology 204 (2010) 2152–2158 The wear resistance and wear mechanism of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam (HIPIB) at an ion current density of 100 A/cm with shot number from one to ten are investigated by dry sliding wear tests. The cross-sectional microstructure and surface microhardness of the irradiated AZ31...
Литературный перевод. Wear mechanism of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam. Elseiver. Surface and Coatings Technology 204 (2010) 2152–2158 Изучались износостойкость и механизм износа магниевого сплава AZ31, облученного мощным ионным пучком (МИП) с плотностью тока 100 А/см2 количеством импульсов от одного до десяти, в условиях сухого трения....
Elseiver. Nuclear Instruments and Metods in Physics Research B 171 (2000) 481-486 The structural and phase transformations occurring in the near-surface layers of pre-quenched W6Mo5Cr4V2 high-speed steel (HSS) subjected to intense pulsed ion beam (IPIB) melting have been investigated. The effect of IPIB irradiation on wear resistance of the HSS has also been studied. The IPIB...
Литературный перевод. Microstructure and wear resistance of high-speed steel treated with intense pulsed ion beam. Elseiver. Nuclear Instruments and Metods in Physics Research B 171 (2000) 481-486 Изучались структурные и фазовые изменения происходящие в при поверхностных слоях предварительно закаленной W6Mo5Cr4V2 быстрорежущей стали (БРС) расплавленных мощным ионным пучком (МИП)....
Elseiver. Nuclear Instruments and Methods in Physics Research B 229 (2005) 381–391 The axisymmetric model of heat transfer in materials irradiated by high-intensity pulsed ion beam (HIPIB) was constructed based on the temporal and spatial distribution of the HIPIB. The ablated behaviors on titanium irradiated by HIPIB during a pulse width of 120 ns with the shots up to 10 was...
Литературный перевод. Numerical analysis of ablated behaviors on titanium irradiated by high-intensity pulsed ion beam. Elseiver. Nuclear Instruments and Methods in Physics Research B 229 (2005) 381–391 Была построена осесимметричная модель теплопереноса в материалах облученных мощным ионным пучком (МИП) основанная на временном и пространственном распространении МИП. Абляция...
The institute of Electrical Engineers of Japan Transactions on Fundamentals and Materials Vol. 125, No.9, 2005, pp. 744-748. A complementary study on experimental observation and theoretical modeling has been performed to investigate the ablation behavior on titanium irradiated by high-intensity pulsed ion beams (HIPIB) with energy density of 70 J/cm2 up to 3 shots. The surface...
Литературный перевод Ablation Behavior of Titanium Irradiated by High-Intensity Pulsed Ion Beams. The institute of Electrical Engineers of Japan Transactions on Fundamentals and Materials, Vol. 125, No.9, 2005. pp. 744-748. Выполнено математическое моделирование и экспериментальное изучение абляции титана при облучении его мощным ионным пучком (МИП), 3 импульсами с плотностью...
Institute of Electrical and Electronics Engineers (IEEE). KORUS Physics. 2001 0-7803-7008-2/01 p.366-370 In this report two sources of high-power ion beams of nanosecond duration are described, a MUK and a TEMP units. They generate ion beams with ion energies of up to 500 keV; puse duration is 20-200 and 50 ns respectively. There are two operations modes to which MUK and TEMP are...
Литературный перевод. High-Power Ion beam Sources for Semiconductor's Technologies. Institute of Electrical and Electronics Engineers (IEEE). KORUS Physics. 2001 0-7803-7008-2/01 p.366-370 В этой статье рассматривается два источника мощных ионных пучков наносекундной длительности - МУК и ТЕМП. Они генерируют ионные пучки мощностью 500кэВ и длительностью 20-200 и 50 нс...
Elseiver. Surface & Coatings Technology 158–159 (2002) 170–173 The investigation results are presented for some processes occurring at different stages of strong adhesion coating and modified layer creation with the use of high-dose implantation and deep diffusive doping of elements under pulsed energetic impact. The investigations have been carried out on installation, providing...
Литературный перевод. Research on materials surface layers element structure formation under combined treatment with pulsed ion beams of different powers. Elseiver. Surface & Coatings Technology 158–159 (2002) 170–173 В настоящей работе представлены результаты для некоторых процессов происходящих на различных стадиях при создании покрытий с высокой адгезией и модифицированных...
KORUS, 2001. Physics P. 363-366. The investigations results are presented for some processes occuring at different stages of strong adhesion coatings and modified layers creation with the use of high-dose impantation and deep diffusive doping of elements under pulsed energetic impact. The investigations have been carried out on the installation providing the possibility of...
Литературный перевод. — Mass Transfer of Elements in the Undersurface Layers Under Combined Treatment by Pulsed Ion Beams and Plasma Flows. KORUS 2001 Physics P. 363-366. Результаты исследований представлены для некоторых процессов, происходящих в различные моменты времени, при создании пленок с высокой степенью адгезии, с использованием высоко-дозовой имплантации и глубокого...
Elseiver. Surface engineering, surface instrumentation and vacuum technology. Volume 67, Issue 2, 13 September 2002, Pages 243-248 Scanning electron microscopy, secondary ion-mass spectrometry, and XRD structure analysis were used to study the effects of irradiation of a thin Al/Ni film on an Fe substrate system by a high-power ion beam with an energy density ~50J/cm2 . The...
Литературный перевод. Modification and mixing multi-layer systems by means of a high-power ion beam. Elseiver. Surface engineering, surface instrumentation and vacuum technology. Volume 67, Issue 2, 13 September 2002, Pages 243-248 Для изучения облучения мощным ионным пучком с плотностью энергии ~50 Дж/см2 тонких Al/Ni пленок на Fe подложке использовались: сканирующая электронная...
Elseiver. Surface and Coatings Technology 114(1999) 206–212 This paper presents research on practical applications of high intensity pulsed ion beams (HIPIBs) investigated at the Nuclear Physics Institute of the Tomsk Polytechnic University (NPI TPU) and the Scientific Industrial Enterprise ‘Linetron’, N. Novgorod. The most interesting scientific results have been obtained in the...
Литературный перевод. High intensity pulsed ion beam sources and their industrial applications. Elseiver. Surface and Coatings Technology 114(1999) 206–212 В настоящей работе представлено исследование по промышленному применению мощных ионных пучков (МИП) выполненное в Институте Ядерной Физики Томского Политехнического Университета (NPI TPU) и Научном Промышленном Предприятии...
Elseiver. Surface and Coatings Technology xx (2007) xxx–xxx
Carbonaceous thin films can be used in microelectronics, superconductors, solar batteries, logic and memory devices, and to increase processing tool wear resistance, and as magnetic nanocomposite materials for information storage. This paper presents a study of carbonaceous thin films deposited on silicon substrates...
Литературный перевод. Carbon film deposition by powerful ion beams. Elseiver. Surface and Coatings Technology xx (2007) xxx–xxx
Тонкие углеродные пленки могут быть использованы в микроэлектронике, сверхпроводящих устройствах, солнечных батареях, логических и запоминающих устройствах, для увеличения износостойкости инструмента и как магнитный нанокомпозитный материал для хранения...
Elseiver. Surface & Coatings Technology 203 (2009) pp. 2608–2611.
Thin carbon film fullerene-containing coatings were formed by deposition on silicon substrates of ablation plasma, which was generated as a result of high-power pulsed ion beam (HPPIB) interaction with graphite targets of different densities. Relative amounts of crystalline phases of fullerenes C60, C70,...
Литературный перевод. Structural-phase composition and tribological characteristics of fullerenes containing carbonic coatings obtained using high-power ion beams. Elseiver. Surface & Coatings Technology 203 (2009). С. 2608–2611.
Тонкие фуллерен-содержащие покрытия были сформированы осаждением на кремниевую подложку аблированной плазмы, которая была получена путем облучения МИП...
Springer, 2018. — 166 p. — (Springer Theses). — ISBN10: 3319962825. This book pioneers a novel approach to investigate the effects of pressure on fission tracks, a geological problem that has remained unsolved for 60 years. While conventional techniques to study fission tracks were limited in precision, this book overcomes such issues by using state-of-the-art synchrotron-based...
Elseiver. Surface and Coatings Technology 158–159 (2002) 488–493 The effect of high-power pulsed ion-beam (HPPIB) irradiation and various methods of the surface treatment on the crater creation phenomenon (cratering) was examined with the use of Auger electron spectroscopy, X-ray diffraction analysis, and scanning electron microscopy. The crater distribution density, sizes and...
Elseiver. Nuclear Instruments and Methods in Physics Research B 148 (1999) 154-158 The effect of high-power, pulsed ion-beam irradiation and various methods of the preliminary surface treatment on the crater formation process was examined using Auger electron spectroscopy, X-ray diffraction analysis, and scanning electron microscopy. The crater distribution density, sizes and...
Elseiver. Surface and Coatings Technology 158–159 (2002) 33–41 The objective of the present research is the critical analysis of test results, dedicated to the effect of ion-beam irradiation conditions upon the fatigue strength of metallic materials. The shaped specimens, simulating the gas turbine engine blade operation and directly the blades, produced of titanium and nickel...
Литературный перевод. Fatigue strength of metals and alloys modified by ion beams. Elseiver. Surface and Coatings Technology 158–159 (2002) 33–41 Объектами настоящего исследования является, критический анализ результатов тестов металлических материалов на усталостную прочность как эффекта после их облучения ионными пучками. Образцы имитировали собой лопатки газотурбинного...
Литературный перевод. Crater formation on the surface of metals and alloys during high power ion beam processing. Elseiver. Nuclear Instruments and Methods in Physics Research B 148 (1999) 154-158 Исследовалось влияние мощного ионного пучка (МИП), при различных методах подготовки поверхности, на формирование кратеров, с использованием электронной Оже-спектроскопии,...
Elseiver. Materials Science and Engineering A243 (1998) 290–293 The effect of thermomechanical processing by high power pulsed ion beams (ions of C+ and H+, energy, E=300 keV, ion current density in a pulse, j=20–220 A/cm2, number of pulses, n=1–100, pulse duration, t=50–100 ns) on the chemical composition and structure of titanium alloy parts surface layers (VT8M, VT9, VT18U and...
Литературный перевод. Termomechanical processing of titanium alloys by high power pulsed ion beams. Elseiver. Materials Science and Engineering A243 (1998) 290–293 Изучалось влияние термомеханических процессов на химический состав и структуру приповерхностного слоя деталей из титановых сплавов, происходящих при облучении мощным ионным пучком (ионами C+ и H +, с энергией, E = 300...
Elseiver. Surface & Coatings Technology 201 (2007) 8654–8658 The effect of high-power, pulsed ion-beam irradiation and various methods of preliminary surface treatment on crater formation process was examined using Auger electron spectroscopy, X-ray diffraction analysis, and scanning electron microscopy. The crater distribution density, siz and shape, along with their...
Литературный перевод. Crater formation on the surface of refractory alloys during high-power ion-beam processing. Elseiver. Surface & Coatings Technology 201 (2007) 8654–8658 Исследовался эффект образования кратеров при облучении МИП образцов с различной подготовкой поверхности. Исследования проводились с помощью Оже электронной спектроскопии, рентгено-структурного анализа и...
Elseiver. Surface & Coatings Technology xx (2007) xxx–xxx The objective of the present research is the critical analysis of test results, dedicated to the effect of ion-beam irradiation conditions upon the sand particle erosion resistance of refractory alloys. Gas turbine engine compressor blades, produced with titanium alloys (VT9 and VT18U) as well as refractory steels (EP866sh...
Литературный перевод. Erosion resistance of refractory alloys modified by ion beams. Elseiver. Surface & Coatings Technology xx (2007) xxx–xxx Цель существующего исследования - критический анализ результатов посвященных эффекту обработки ионным пучком после песчаной эрозии жаростойких сплавов. Лопатки компрессора газотурбинного двигателя изготовленные из титановых сплавов (ВТ9 и...
CRC Press; Taylor & Francis Group, 2013. — 366 p. – ISBN: 9814303755. Considerable attention has been paid to ion beam sputtering as an effective way to fabricate self-organized nano-patterns on various substrates. The significance of this method for patterning surfaces is that the technique is fast, simple, and less expensive. The possibility to create patterns on very large...
Elseiver, Surface and Coatings Technology 158–159 (2002) pp. 643–646. Doping of material surface layers though mixing of multi-element thin films with the surface layer of the sample is a promisi technological process currently being developed. This work reports the results of experimental investigation of mixing and structural-phase changes in heterogeneous Al–C and Al–Si systems...
Литературный перевод. — Mass transfer of elements and structural-phase changes in heterogeneous thin-film systems under high-power ion beam treatment. Elseiver. Surface and Coatings Technology 158–159 (2002) pp. 643–646. Легирование поверхности материалов, путем перемешивания многоэлементных тонких пленок с поверхностным слоем образца, на настоящий момент является перспективным...
Elseiver. Nuclear Instruments and Metods in Physics Research B 171 (2000) pp. 481-486 Using Rutherford back-scattering (RBS), secondary ion mass spectrometry (SIMS), Auger-electron spectroscopy (AES), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) techniques, formation of different point and linear defects have been found in iron as a result of...
Литературный перевод. Defects in α-Fe induced by intense-pulsed ion beam (IPIB). Elseiver. Nuclear Instruments and Metods in Physics Research B 171 (2000) c. 481-486 Исследование точечных и линейных дефектов образованных в результате обработки железа мощным ионным пучком проводилось с использованием Резерфордовского обратного рассеяния (RBS), вторичной ионной масс-спектрометрии...
Elseiver. Nuclear Instruments and Methods in Physics Research B 161-163 (2000) 1132-1136 Formation of dislocation structures has been found in a-Fe as a result of intense-pulsed ion beam treatment. The close correlation between an average scalar dislocation density and microhardness has been proved both in near-surface layers and at high depths for the different regimes of...
Литературный перевод. Comparative analysis of radiation damages, mechanical and tribological properties of a-Fe exposed to intense-pulsed electron and ion beams. Elseiver. Nuclear Instruments and Methods in Physics Research B 161-163 (2000) 1132-1136 Обнаружено формирование дислокационной структуры в α-Fe при облучении мощным иным пучком. Объяснена близкая корреляция между средней...
Elseiver. Materials Science and Engineering A 457 (2007) 84–89 High-intensity pulsed ion beam (HIPIB) treatment is a new technology for surface modification of materials. In this paper, the surface of 316L stainless steel was irradiated by high-intensity pulsed ion beams at ion current density of 100, 200 and 300 A/cm2 with 1,5 and 10shots. The surface morphology and the phase...
Elseiver. Surface and Coatings Technology 201 (2007) 5884–5890 The surface of 316L stainless steel was irradiated by high-intensity pulsed ion beams (HIPIB) at ion current density of 100 , 200 and 300A/cm2 with 10 shots. The surface morphology and the phase structure in the near surface region of original and treated samples were analyzed with scanning electron microscope (SEM)...
Литературный перевод. Surface modification of 316L stainless steel with high-intensity pulsed ion beams. Elseiver. Surface and Coatings Technology 201 (2007) 5884–5890 Поверхность образцов из нержавеющей стали 316L была облучена мощным ионным пучком (МИП) при плотности тока 100, 200 и 300 A/cм2 10 импульсами. Морфология поверхности и фазовый состав приповерхностных слоев...
Los Alamos National Laboratory. LA-UR-98-1794. Form No. 836 R5 ST 2629 10/91. 8P. When treated with intense pulsed ion beams (IPIB), many materials exhibit increased wear resistance, fatigue life, and hardness. However, this treatment often results in cratering and roughening of the surface. In this work, high purity single crystal and polycrystalline copper samples were...
Литературный перевод. — Cratering Behavior in Single- and Poly-Crystalline Copper Irradiated by an Intense Pulsed Ion Beam. Los Alamos National Laboratory. LA-UR-98-1794. Form No. 836 R5 ST 2629 10/91. 8P. При обработке мощным ионным пучком (МИП), многие материалы показывают улучшение износостойкости, усталостной прочности и твердости. Тем не менее, часто эта обработка приводит...
Elseiver. Surface & Coatings Technology 201 (2007) pp. 5090–5092. In the recent 20 years, intense pulsed ion beam (IPIB) techniques, due to the advantages of the beam, have been researched extensively in material field. In this paper, we established a temperature model with phase transformation. Based on the model, two-dimensional numerical research has been carried out on the...
Литературный перевод. Two-dimensional numerical research on effects of titanium target irradiated by intense pulsed ion beam. Elseiver. Surface & Coatings Technology 201 (2007) 5090–pp. 5092. В последние 20 лет интенсивно исследуется влияние мощных ионных пучком (МИП) на материалы. В настоящей статье установлена взаимосвязь между температурной моделью и фазовыми...
Elseiver. Surface and Coatings Technology 201 (2007) 6573–6575 Gaussian type models have been established according to the real detected voltage of magnetically insulated ion diode and intense pulsed ion beam density near the focus of the diode. The energy deposition of Al target irradiated by intense pulsed ion beam has been simulated by Monte-Carlo method based on these models....
Литературный перевод. Model of intense pulsed ion beam and simulation study of energy deposited on target. Elseiver. Surface and Coatings Technology 201 (2007) 6573–6575 Модели Гауссовского типа были применены к реальному напряжению магнитно изолированного ионного диода и мощного ионного пучка около центра диода. Распределение энергии на алюминиевой мишени облученной МИП...
Elseiver. Surface and Coatings Technology xxx (2011) xxx–xxx
The energy deposition of high-intensity pulsed ion beam (HIPIB) into a titanium target was studied in TEMP-6 apparatus of bipolar-pulse mode using a self-magnetic field magnetically insulated ion diode (MID), where anode plasma was pre-generated by a first negative voltage and then mixed carbon ions and proton beam was...
Литературный перевод. On time-of-flight ion energy deposition into a metal target by high-intensity pulsed ion beam generated in bipolar-pulse mode. Elseiver. Surface and Coatings Technology xxx (2011) xxx–xxx
Исследовалось распределение энергии по времени мощного ионного пучка (МИП) на титановой мишени при облучении на ускорителе ТЕМП-6 с магнитоизолированным диодом (МИД), в...
Elseiver. Nuclear Instruments and Methods in Physics Research B xxx (2011) xxx–xxx Anticorrosion behavior is an important factor for the reliability and durability of thermal barrier coatings (TBCs). Intense pulsed ion beam (ion species: 70% H+ + 30% C+; current density: 150 A/cm2 and 250 A/cm2; accelerate voltage: 300 kV; pulse duration: 65 ns) irradiation were used to improve...
Литературный перевод. Improving anti-corrosion property of thermal barrier coatings by intense pulsed ion beam irradiation. Elseiver. Nuclear Instruments and Methods in Physics Research B xxx (2011) xxx–xxx Сопротивление коррозии важный фактор для надежности и долговечности тепловых барьерных покрытий (ТБП). Для улучшения антикоррозионных свойств Y2O3-стабилизированного ZrO2...
Elseiver. Applied Surface Science 252 (2006) 5776–5782 X-ray photo electron spectroscopy (XPS) is used to probe oxidation states of Si species in particles deposited using a pulsed ion-beam evaporation method. The effects of He ambient gas, ion beam intensity and post-treatments on the oxides composition and oxygen content have been studied. It is found that presence of He ambient...
Литературный перевод. X-ray photoelectron spectroscopy characterization of oxidated Si particles formed by pulsed ion-beam ablation. Elseiver. Applied Surface Science 252 (2006) 5776–5782 Рентгеновская фотоэлектронная спектроскопия (РФС) использовалась для исследования состояния окисления частиц Si осажденных с использованием метода испарения при помощи мощного ионного пучка....
Elseiver. Fusion Engineering and Design 85 (2010) 1999–2004. A carbon fiber composite (CFC) was thermally tested with high heat flux on a high-intensity pulsed ion beam (HIPIB) apparatus, simulating the ITER specific thermal impacts in divertor region during normal operation or on first wall during off-normal events. The HIPIB shot is capable of delivering an extremely high...
Elseiver, Surface and Coatings Technology 201 (2007) pp. 5264–5268. The effect of magnetic field on the characteristics of high-intensity pulsed ion beam (HIPIB) is investigated on the magnetically insulated mode of external-magnetic field MID in a TEMP-6 type HIPIB apparatus. Without magnetic field, the perveance P (P=I(t)/[V(t)] 3/2) increases rapidly after the plasma...
Литературный перевод. — Magnetically insulation of the ion diode used for high-intensity pulsed ion beam. Elseiver. Surface and Coatings Technology 201 (2007) pp. 5264–5268. Исследовано влияние магнитного поля на характеристик мощного ионного пучка (МИП) получаемого при помощи магнитоизолированного диода (МИД) с использованием внешнего магнитного поля в установке ТЕМП- 6. В...
Elseiver. Nuclear Instruments and Metods in Physics Research B Volume 272, 1 February 2012, pp. 454-457 A piezoelectric transducer based on lead–zirconte–titanate (PZT) piezoelectric ceramic thin plate was appliedtocharacterize thestress waves intitaniumtargets under high-intensitypulsed ionbeam (HIPIB) irradiation at a peak accelerating voltage of 350 kV and an ion current...
Литературный перевод. Dynamic response of metals under high-intensity pulsed ion beam irradiation for surface modification. Elseiver. Nuclear Instruments and Metods in Physics Research B Volume 272, 1 February 2012, c. 454-457 Для характеристики ударной волны в титановых мишения при их облучении мощным ионным пучком (МИП) с плотностью тока до 400 А/см2, ускоряющим напряжением...
Москва-Донецк: ИздАТ МАС Чернобыль-Атом, 1997. — 328 с. Рассмотрены основные физические процессы, вызываемые бомбардировкой ионами поверхности твердых материалов. Приведены закономерности изменения коэффициентов эмиссии электронов, фотонов и атомов от различных параметров, характеризующих ион и атом мишени. Изложены механизмы и теории, описывающие названные процессы, которые...
Статья. Опубликована в УФН, 1999, т.169, №11 с. 1243 - 1270 Библиогр. - 159 наим. Приведен подробный анализ современного состояния исследований (включая работы авторов) по модификации железа, сталей, сплавов и некоторых металлических систем импульсными мощными электронными и ионными пучками средней интенсивности 10 6 - 10 9 Вт см -2 . Описаны многие процессы, определяющие...
А.Н.Диденко, Ю.П.Шаркеев, Э.В.Козлов, А.И.Рябчиков Томск: Издательство НТЛ, 2004. - 328 стр. Книга посвящена описанию нового фундаментального явления, имеющего место при ионной имплантации кристаллических тел, - эффекта дальнодействия в металлических материалах. Представлены результаты систематических комплексных экспериментальных исследований авторов, приведен обзор...
Томск: Издательство НТЛ, 2004. — 328 с. — ISBN: 5-89503-218-4. Книга посвящена описанию нового фундаментального явления, имеющего место при ионной имплантации кристаллических тел, - эффекта дальнодействия в металлических материалах. Представлены результаты систематических комплексных экспериментальных исследований авторов, приведен обзор опубликованных литературных данных, дано...
Волгоград: ВолгГТУ, 2018. — 209, [2] с. — ISBN: 978-5-9948-2915-8. Рассмотрены существующие способы получения катализаторов. Новым способом получения покрытий различного назначения (каталитических, износостойких, антикоррозионных) на различные поверхности (металлы, керамику) и прецизионные поверхности топливной аппаратуры дизелей является ионная имплантация. Представлены...
Кадыржанов К.К., Комаров Ф.Ф., Погребняк А.Д., Русаков В.С., Туркебаев Т.Э. — М.: Издательство МГУ, 2005. — 640 с. — ISBN 5-211-05153-X. Коллективная монография посвящена современному состоянию бурно развивающегося направления науки и техники - ионной модификации материалов. В монографии рассмотрен широкий круг вопросов ионно-лучевой и ионно-плазменной модификации материалов....
Москва: Издательство МГУ, 2005. — 640 с. Коллективная монография посвящена современному состоянию бурно развивающегося направления науки и техники - ионной модификации материалов. В монографии рассмотрен широкий круг вопросов ионно-лучевой и ионно-плазменной модификации материалов. Изложены результаты как собственных исследований, так и других исследователей, которые, по мнению...
Учебное пособие. - Мн: БГУ, 1998. - 209с. В пособии изложены современные представления о физике взаимодействия ионных пучков с твердыми телами, рассмотрены вопросы образования и отжига дефектов кристаллической решетки, формирования заданных профилей распределения легирующих атомов. Приведены данные об оборудовании, используемом для ионной и фотонной обработки материалов и...
Учеб.пособие по курсу "Конструирование и расчёт установок ионного распыления" / Под ред. С.Д. Гришина. - М., 1990. - 76 с., ил. ISBN: 5-7038-029I-1 Рассмотрены вопросы конструирования и расчёта магнетронных распылительных систем, их отдельных узлов и технологических плазменных установок на их основе. Предназначено для студентов старших курсов технических ВУЗов, а также...
Минск: БНТУ, 2012. - 205 с. В данной монографии предпринята попытка обобщения опыта исследований и оценки возможностей использования тлеющего разряда не только для активации обрабатываемых поверхностей под покрытия, но и как самостоятельной технологии по имплантации и структурированию поверхностей инструментов и материалов деталей технических систем. Предназначена для научных и...
Монография, Минск, Белгосуниверситет, 1998 г., 197 с. В книге представлены и критически проанализированы данные по модификации структуры, состава и свойств полимерных материалов ионной имплантацией. Существенное внимание уделено основам метода ионной имплантации, а также ряду методов исследования полимеров. Отдельно обсуждаются вопросы термической обработки полимеров и приводятся...
М.: Вузовская книга, 1998. — 392 с. Рассмотрены основные физические процессы, вызываемые бомбардировкой ионами поверхности твердых материалов: потери энергии в упругих и неупругих столкновениях ионов с атомами мишени; пробеги и распределение энергии и внедренных ионов по глубине; гигантское усиление миграции атомов в металлах под действием высокоинтенсивных (50-200 А/см^)...
Монография. — Новосибирск: СибАК, 2019. — 106 с. — ISBN: 978-5-4379-0617-0. В монографии приведены результаты экспериментальных исследований и моделирования процессов в ионном диоде, который обеспечивает генерацию импульсных ионных пучков с плотностью энергии 5-10 Дж/см 2 . При этом более половины энергии пучка расходуется на абляцию материала мишени, что позволяет реализовать...
Монография. — Новосибирск: СибАК, 2016. — 126 c. В монографии изложены научные основы диагностики наиболее важных параметров импульсных ионных пучков — плотности ионного тока, плотности энергии, состава ионного пучка. Основное внимание уделено методам анализа мощных ионных пучков, предназначенных для технологических применений. Монография содержит подробный анализ области...
Институт сильноточной электроники СО РАН Томск. 8 стр. Письма в ЖТФ, 2008, Т34, вып 20 Исследованы характеристики поверхностного легирования сплава ВТ6 (Ti - 6Al - 4V) цирконием, предпринятого с целью снижения концентрации Al и V вблизи поверхности.
М.: Металлургия, 1985. — 392 с. В данной книге рассмотрены два основных направления ионной имплантации: как метода исследований и как инструмента целенаправленного изменения поверхностных свойств металлов и сплавов. Изложены возможные способы практического применения метода для изменения специфических свойств материалов, включая стойкость к коррозии, высокотемпературное...
Сборник статей. Пер. с англ. — М.: Металлургия, 1985. — 392 с. Рассмотрены два основных направления ионной имплантации: как метода исследований и как инструмента целенаправленного изменения поверхностных свойств металлов и сплавов. Изложены возможные способы практического применения метода для изменения специфических свойств материалов, включая стойкость к коррозии,...
СПб: СПб ГУ ИТМО, 2007. — 151 с. Учебное пособие по курсу ''Ионно-лучевые методы в оптической технологии'' содержит теоретический и экспериментальный материал по взаимодействию ионных пучков с поверхностью оптических материалов. В пособии рассмотрены основные технологические процессы с использованием ионной обработки, даны практические рекомендации по получению высокоточных...
Комментарии